Profiled Base for versatility
Most of the Optimus 6 Subsea tools have flats machined down the side of the tool to allow fitting to flanges with very close adjacent hexagon nuts. Front and back access windows also allow for relatively low headroom fitting requirements.
Profiled Rear for versatility
All Tentec Optimus 6 Subsea bolt tensioning tools are profile machine cut at the rear of the tool to ensure maximum versatility when fitted to flanges. This special profile allows maximum clearance when fitting the tools to weld neck type flanges.
Manufactured from Stainless Steel.
Optimus 6 Subsea Bolt Tensioning Tools are manufactured from high strength stainless steel material. The use of stainless steel dramatically reduces the amount of maintenance work required following long periods of exposure to the subsea environment.
High bolt load capacity.
The Optimus 6 range of subsea bolt tensioning tools was designed with enough load capacity to tension standard ANSI B16.5 flanges and the high load specifications of API 17D Flanges. Most subsea tools run out of load capacity when tensioning API 17D/SV swivel flanges. Tentec have made sure enough load capacity is available on the Optimus 6 Subsea bolt tensioning tools.
Only 9 Base Tools.
By careful optimization of design, only 9 base tools are required to Tension bolts from 3/4” to 4”. The same base tools can be used to tension M20 - M100 metric threads.
Back to Top
Quick Links: Home | Subsea Tensioners | Flange Pulling System | Air Pumps | Hose Reels | Bolt Load Software
